
2,500 Gallon Polypropylene Vertical Tank 2.2 84 in.
Part # PP-VTB02500-84-2.2-NAT
Price
$9,449.00
Installing this tank? Read our single wall installation steps: base, tie-downs, venting and the water test.
Tank Specifications
- Capacity
- 2,500 gallons
- Dimensions
- 84" Diameter × 116" Height (7 ft × 9 ft 8 in)
- Specific Gravity
- 2.2
- Color
- Translucent White
- Tank Type
- Vertical
- Wall
- Single Wall
- Installation
- Above-ground tank. Do not install below grade.
- Lid
- 16"
- Resin
- Polypropylene
- Manufacturer
- Bailiff
- Weight
- 750 lbs
- Every Tank Undergoes Hydrostatic Testing Before Release
- FDA approved resin for food grade/potable water applications
- Complies with FDA standards 21 CFR 177.1520 (1) 3.1 and 3.2
- Infused with UV Inhibitors to Prolong the Life of This Tank
- Rated for Atmospheric Pressure Only
- Lifting/Tie-Down Lugs Molded-In
Fittings & Options for Sulfuric Acid
We outfit sulfuric acid tanks to your specifications at our Willis, Texas plant.
- Bolted Flanges (no welded sidewall flanges in acid service)
- Bulkhead Fittings with Viton® Gaskets
- PVDF Fittings for Concentrations Above 75%
- Top Fill Lines
- Screened U-Vents
- Ball Valves
- Reverse Float & Ultrasonic Level Indicators
- Interstitial Leak Detectors (Double Wall) (PDF)
- Insulation & Heat Tracing
- Wind/Seismic Tie-Down Systems
- OSHA Ladders
Manufacturer Information
- Manufacturer
- Bailiff
- Part Number
- PP-VTB02500-84-2.2-NAT
- Warranty
- Limited 1-Year Warranty for sulfuric acid service
Resin Information
- Resin
- Polypropylene
- Color
- Translucent White
- Temperature
- Polypropylene has a maximum continuous use temperature of 200 F.
- Chemical Compatibility
- Sulfuric Acid Chemical Compatibility
Shipping Information
- Ship Width
- 0"
- Ship Length
- 0"
- Ship Height
- 0"
- Ship Weight
- Ship Class
Sulfuric acid service
2,500-Gallon Polypropylene Tank in Sulfuric Acid Service
Polypropylene is rated Excellent for sulfuric acid up to 75% in our compatibility database. Here is how this tank fits your acid.
| Concentration | Polypropylene rating |
|---|---|
| 1% – 10% | Excellent |
| 10% – 75% | Excellent |
| 75% – 93% | Fair |
| Above 93% | Contact us |
Load check
Full of 96–98% sulfuric acid, this tank would hold about 37,500 lb of acid (about 15 lb per gallon). It is rated 2.2 SG, well above the roughly 1.84 specific gravity of concentrated acid, for extra wall thickness and margin.
Containment
This is a single wall tank. To capture leaks and acid fumes without a separate dike, consider a Polypropylene double wall tank.
Fittings & gaskets
Up to 75% acid, polypropylene, PVC and CPVC fittings are rated Excellent. Seal bulkheads with Viton® gaskets. No welded flanges in the sidewall for sulfuric acid. See fittings.
Freeze protection
Pure sulfuric acid is solid below 51 °F, so concentrated acid stored outdoors may need an insulated tank and heat tracing.
Before you order
Match the Fittings to Your Acid
Gaskets, fittings and metal hardware all have to handle your concentration, not just the tank.
Also see the installation guide, warranty terms and sulfuric acid storage guide.
Tell Us Your Concentration
Send the acid concentration, temperature, volume and fittings you need. We’ll match the resin, SG rating and gaskets and send a quote.
