PVDF (Kynar®) · double wall

PVDF Double Wall Sulfuric Acid Tanks

Double wall PVDF tanks combine the best chemical resistance for concentrated sulfuric acid with built-in secondary containment.

PVDF Double Wall Sulfuric Acid Tank Prices

6 PVDF double wall vertical tanks from 100 to 1,000 gallons, priced from $15,500 to $99,999. Available in 1.9 SG rating and translucent white and white.

PVDF Double Wall Sulfuric Acid Tank Prices
1,000 Gallon PVDF Double Wall Vertical Tank 1.9 SG1,000 89" Height x 64" Diameter 7 ft 5 in H × 5 ft 4 in dia.1.9Translucent White $99,999.00
700 Gallon PVDF Double Wall Vertical Tank 1.9 SG700 98" Height x 60" Diameter 8 ft 2 in H × 5 ft dia.1.9Translucent White $59,990.00
550 Gallon PVDF Double Wall Vertical Tank 1.9 SG550 84" Height x 48" Diameter 7 ft H × 4 ft dia.1.9Translucent White $99,999.00
300 Gallon PVDF Double Wall Vertical Tank 1.9 SG 48 in. Dia.300 78" Height x 48" Diameter 6 ft 6 in H × 4 ft dia.1.9White $99,999.00
200 Gallon PVDF Double Wall Vertical Tank 1.9 SG200 69" Height x 35" Diameter 5 ft 9 in H × 2 ft 11 in dia.1.9White $99,999.00
100 Gallon PVDF Double Wall Vertical Tank 1.9 SG100 63" Height x 31" Diameter 5 ft 3 in H × 2 ft 7 in dia.1.9White $15,500.00

SG (specific gravity) is the heaviest liquid a tank is built to hold. Water is 1.0, so a 1.9 SG tank is made for liquids up to 1.9 times as heavy as water. Choose an SG rating at or above the specific gravity of your liquid.

Why this tank

Built for Sulfuric Acid

Every tank on this page is rated 1.9 or 2.2 specific gravity. Concentrated sulfuric acid weighs about 1.84 times as much as water, so lighter-duty tanks are left off this list.

SG

1.9 & 2.2 SG ratings

Concentrated acid is heavy, about 15 lb per gallon. We list only tanks rated 1.9 SG or 2.2 SG; choose 2.2 SG for extra wall thickness.

A

Rated for H2SO4

PVDF (Kynar®) is rated Excellent for sulfuric acid at every concentration in our database, 1% to 93%. See the ratings.

★

Containment for concentrated acid

Excellent PVDF resistance in both walls, with the outer wall holding any leak and its fumes.

⌀

Matched fittings & gaskets

We install fittings and Viton® gaskets suited to your concentration. No welded flanges in the sidewall for sulfuric acid. See fittings.

Concentration guide

How PVDF handles each concentration

Ratings from our chemical compatibility database. Temperature and impurities matter too, so confirm your application with us.

ConcentrationPVDF (Kynar®) tankViton® gasketEPDM gasket
1% – 10%ExcellentExcellentExcellent
10% – 75%ExcellentExcellentGood
75% – 93%ExcellentExcellentGood
Above 93%Not in our database. Contact us before storing 93–98% acid.

See the full sulfuric acid compatibility chart, our sulfuric acid storage guide and the tank installation guide. Sulfuric acid properties: PubChem CID 1118.

FAQ

PVDF Double Wall Tank Questions

Which specific gravity rating do I need for sulfuric acid?

Choose a tank rated at or above the specific gravity of your acid. Concentrated sulfuric acid (96–98%) has a specific gravity of about 1.84, so a 1.9 SG tank is the minimum and 2.2 SG adds wall thickness and margin. Dilute acid weighs less, but we list only 1.9 and 2.2 SG tanks for sulfuric acid service.

What concentrations can a PVDF tank store?

PVDF (Kynar®) is rated Excellent for sulfuric acid at every concentration in our database, 1% to 93%. For acid above 93%, contact us before ordering.

Should I choose a double wall tank?

We strongly recommend it. The sealed outer wall captures a leak from the inner tank and keeps fumes from spilled acid contained, which a separate containment dike cannot do.

Which gaskets work with sulfuric acid?

Viton® is rated Excellent at every concentration from 1% to 93%. EPDM is Excellent below 10% and Good above. Buna-N drops to Fair above 75%. We specify gaskets to match your concentration.

Why use a plastic tank instead of steel?

Dilute sulfuric acid attacks most metals and can release hydrogen gas, according to PubChem. HDPE, polypropylene and PVDF tanks are not attacked by the acid concentrations they are rated for.

What is the warranty on a sulfuric acid tank?

Tanks used for sulfuric acid carry a limited one-year warranty from the date of manufacture, instead of our standard three-year tank warranty. Fittings we install carry a one-year warranty from installation. See warranty terms.

Tell Us Your Concentration

Send the acid concentration, temperature, volume and fittings you need. We’ll match the resin, SG rating and gaskets and send a quote.