Happy Thanksgiving from Bailiff Enterprises! Our office and plant will be closed Thursday, November 26 and Friday, November 27, 2026. We reopen Monday, November 30.

PVDF (Kynar®) · cone bottom

PVDF Cone Bottom Tanks for Sulfuric Acid

Molded from genuine Kynar® PVDF.

PVDF cone bottom tanks pair complete drainage with Excellent resistance to sulfuric acid at concentrations up to 93%.

PVDF Cone Bottom Sulfuric Acid Tank Prices

6 PVDF cone bottom tanks from 60 to 1,000 gallons, priced from $5,090 to $44,999. Available in 1.9 SG rating and translucent white and white.

PVDF Cone Bottom Sulfuric Acid Tank Prices
1,000 Gallon PVDF Closed Top Cone Bottom Tank 1.9 SG 70 in.1,000 92" Height x 70" Diameter 7 ft 8 in H × 5 ft 10 in dia.1.9Translucent White515 lbs $44,999.00
800 Gallon PVDF Flat Top Cone Bottom Tank 1.9 SG800 96" Height x 68" Diameter 8 ft H × 5 ft 8 in dia.1.9Translucent White430 lbs $35,990.00
500 Gallon PVDF Flat Top Cone Bottom Tank 1.9 SG500 82" Height x 52" Diameter 6 ft 10 in H × 4 ft 4 in dia.1.9Translucent White225 lbs $18,490.00
250 Gallon PVDF Opentop Cone Bottom Tank 1.9 SG250 70" Height x 36" Diameter 5 ft 10 in H × 3 ft dia.1.9Translucent White120 lbs $10,690.00
150 Gallon PVDF Closed Top Cone Bottom Tank 1.9 SG150 54" Height x 36" Diameter 4 ft 6 in H × 3 ft dia.1.9Translucent White75 lbs $8,890.00
60 Gallon PVDF Closed Top Cone Bottom Tank 1.9 SG60 27" Height x 36" Diameter 2 ft 3 in H × 3 ft dia.1.9White50 lbs $5,090.00

SG (specific gravity) is the heaviest liquid a tank is built to hold. Water is 1.0, so a 1.9 SG tank is made for liquids up to 1.9 times as heavy as water. Choose an SG rating at or above the specific gravity of your liquid.

Why this tank

Built for Sulfuric Acid

Every tank on this page is rated 1.9 or 2.2 specific gravity. Concentrated sulfuric acid weighs about 1.84 times as much as water, so lighter-duty tanks are left off this list.

SG

1.9 & 2.2 SG ratings

Concentrated acid is heavy, about 15 lb per gallon. We list only tanks rated 1.9 SG or 2.2 SG; choose 2.2 SG for extra wall thickness.

A

Rated for H2SO4

PVDF (Kynar®) is rated Excellent for sulfuric acid at every concentration in our database, 1% to 93%. See the ratings.

★

Complete drainage, any concentration

Full drain-out with PVDF’s Excellent rating from 1% to 93%.

⌀

Matched fittings & gaskets

We install fittings and Viton® gaskets suited to your concentration. No welded flanges in the sidewall for sulfuric acid. See fittings.

Concentration guide

How PVDF handles each concentration

Ratings from our chemical compatibility database. Temperature and impurities matter too, so confirm your application with us.

ConcentrationPVDF (Kynar®) tankViton® gasketEPDM gasket
1% – 10%ExcellentExcellentExcellent
10% – 75%ExcellentExcellentGood
75% – 93%ExcellentExcellentGood
Above 93%Not in our database. Contact us before storing 93–98% acid.

See the full sulfuric acid compatibility chart, our sulfuric acid storage guide and the tank installation guide. Sulfuric acid properties: PubChem CID 1118.

FAQ

PVDF Cone Bottom Tank Questions

Which specific gravity rating do I need for sulfuric acid?

Choose a tank rated at or above the specific gravity of your acid. Concentrated sulfuric acid (96–98%) has a specific gravity of about 1.84, so a 1.9 SG tank is the minimum and 2.2 SG adds wall thickness and margin. Dilute acid weighs less, but we list only 1.9 and 2.2 SG tanks for sulfuric acid service.

What concentrations can a PVDF tank store?

PVDF (Kynar®) is rated Excellent for sulfuric acid at every concentration in our database, 1% to 93%. For acid above 93%, contact us before ordering.

Should I choose a double wall tank?

We strongly recommend it. The sealed outer wall captures a leak from the inner tank and keeps fumes from spilled acid contained, which a separate containment dike cannot do.

Which gaskets work with sulfuric acid?

Viton® is rated Excellent at every concentration from 1% to 93%. EPDM is Excellent below 10% and Good above. Buna-N drops to Fair above 75%. We specify gaskets to match your concentration.

Why use a plastic tank instead of steel?

Dilute sulfuric acid attacks most metals and can release hydrogen gas, according to PubChem. HDPE, polypropylene and PVDF tanks are not attacked by the acid concentrations they are rated for.

What is the warranty on a sulfuric acid tank?

Tanks used for sulfuric acid carry a limited one-year warranty from the date of manufacture, instead of our standard three-year tank warranty. Fittings we install carry a one-year warranty from installation. See warranty terms.

Tell Us Your Concentration

Send the acid concentration, temperature, volume and fittings you need. We’ll match the resin, SG rating and gaskets and send a quote.