Tank Specifications

Capacity: 2,100 gallons
Dimensions: 87" Diameter × 89" Height (7 ft 3 in × 7 ft 5 in)
Specific Gravity: 1.9
Color: Light Blue
Tank Type: Vertical
Wall: Single Wall
Installation: Above-ground tank. Do not install below grade.
Lid: 16"
Resin: HDPE
Manufacturer: Norwesco
Weight: 350 lbs

FDA approved resin for food grade/potable water applications
Complies with FDA standards 21 CFR 177.1520 (1) 3.1 and 3.2
Infused with UV Inhibitors to Prolong the Life of This Tank
Rated for Atmospheric Pressure Only
Lifting/Tie-Down Lugs Molded-In

3D View

Drag to rotate, scroll or pinch to zoom. Shows the standard tank without fittings or options. The model is for reference, and small differences from the finished tank are possible. See the tank drawing for dimensions.

Fittings & Options for Sulfuric Acid

We outfit sulfuric acid tanks to your specifications at our Willis, Texas plant.

Bolted Flanges (no welded sidewall flanges in acid service)
Bulkhead Fittings with Viton® Gaskets
PVDF Fittings for Concentrations Above 75%
Top Fill Lines
Screened U-Vents
Ball Valves
Reverse Float & Ultrasonic Level Indicators
Interstitial Leak Detectors (Double Wall)
Insulation & Heat Tracing
Wind/Seismic Tie-Down Systems
OSHA Ladders

Manufacturer Information

Manufacturer: Norwesco
Part Number: HDPE-VTN02100-87-1.9-BLU
Warranty: Limited 1-Year Warranty for sulfuric acid service

Resin Information

Resin: HDPE
Color: Light Blue
Temperature: HDPE has a maximum continuous use temperature of 120 F.
Chemical Compatibility: Sulfuric Acid Chemical Compatibility

Shipping Information

Ship Width: 87"
Ship Length: 87"
Ship Height: 95"
Ship Weight
Ship Class

Sulfuric acid service

2,100-Gallon HDPE Tank in Sulfuric Acid Service

HDPE is rated Excellent for sulfuric acid to 75% and Good to 93% in our compatibility database. Here is how this tank fits your acid.

Concentration	HDPE rating
1% – 10%	Excellent
10% – 75%	Excellent
75% – 93%	Good
Above 93%	Contact us

Load check

Full of 96–98% sulfuric acid, this tank would hold about 31,500 lb of acid (about 15 lb per gallon). It is rated 1.9 SG, above the roughly 1.84 specific gravity of concentrated acid.

⌂

Containment

This is a single wall tank. To capture leaks and acid fumes without a separate dike, consider a HDPE double wall tank.

⌀

Fittings & gaskets

Up to 75% acid, PVC, CPVC and polypropylene fittings are rated Excellent; above 75%, specify PVDF fittings. Seal bulkheads with Viton® gaskets. No welded flanges in the sidewall for sulfuric acid. See fittings.

❄